CUT TO SIZESERVICES IN BRISBANE

Price-list – DRILLED BOARD CUT on SIZE – download PRICE LISTvalid until 31 March 2024

Prices for:
Edging– 1mm ABS charged per linear metre.
Cut to Size – Necessary Services
16 mm Carcass White HMR Mat
22×1 mm White Carcass edging

PANELS: 25mm Carcass White HMR Tex, 16mm Raw MR MDF, 18mm Raw MR MDF, 25mm Raw MR MDF, 32mm Raw MR MDF, 16mm Raw HMR PB, 16mm White Satin MRMDF, 18mm White Satin MRMDF, 25mm White Satin MRMDF, 32mm White Satin MRMDF.
FLEXI PANEL 16mm, LAMINEX 16mm, FORMICA 16mm, POLYTEC 16mm, POLYTEC 18mm , StyleLite Gloss 18mm.

BORING & SHAPING: Gable boring, Hinge hole boring
Standard white corner shelf cutout (no edging), Standard white corner shelf cutout & 1mm edging, Colour open shelf shaping & 1mm edging, Tambour surrounds cutout & 1mm internal edging

C – CABINETS LIST and the Continental Kitchens Standard Sizes – download HERE

Packaging 

After manufacturing, each component is wrapped into bundles, making it easier to pick up or to deliver to site.
If you’re a builder, carpenter, landlord or property developer, we have trade prices on all our services and products.

Collecting or Delivery 

You are welcome to collect your flatpack order and/or accessories from our factory.
Local delivery is guaranteed where safe and clear vehicle access is available, to the front door of the house, lobby, construction site gate, or garage…
If we are NOT carrying out the installation of delivered goods, you may need additional labour required to offload.

Our staff is instructed not to remove shoes or any other personal protective equipment during delivering, in compliance with the Occupational Health & Safety Policy.

PLEASE NOTE: We do not deliver rainy days. If we have continual heavy rain, our team are given extra time to complete their delivery.

Assembling & Installation 

Cabinets and kitchens will be supplied to you in individual bundles for easy transportation, or we can deliver them to you fully assembled and ready for you to install.
We can assemble your flatpack products and deliver them to you fully assembled and ready for you to install.
It saves them time on the site and all you have to do is to install them in place.

We offer the full installation and project management service to take your kitchen from start to finish.

Measurement 

If you pay a deposit for your order, we can arrange free site measure.
Without a deposit, a site measure is available for $150 call-out fee that will be charged at the time of booking.
This fee will be offset against your order, if you proceed with your order within the next six months from the site measure.

CUT TO SIZE CARCASS – Kitchen cabinets or stylish complete kitchens… bedroom carcasses or beautifully bespoke bedrooms…, bathrooms, wardrobes, vanities, laundries…

 High quality and easy to install flat pack carcass are available in a choice of designs, sizes, features and finishes for customers in Brisbane, Logan, Ipswich and the Gold Coast.
The carcass is the shell of the unit, complete with shelves but NO the door.
You only see the carcass when the door is open.

Cut to Size – Flat Pack Convenience

 Fast, reliable and accurate MDF, MFC, Laminated boards… cutting service in Brisbane at competitive prices. We also offer an MDF edging service.
We use CNC machinery for manufacturing – they are operated by computers and offer more precise performance.
Custom made cabinets are becoming a number one choice for many homeowners throughout Brisbane, the Gold Coast…

Domestic or commercial, no matter what size the project is, please contact us.

We are located in units 3 & 4 Pendrey Ct., QLD 4114, Brisbane..

01 – Order FORM – Board Cut to Size – CUT to SIZE PANELS – download HERE

With this form you can order:
– 16mm WHITE HMR TEXTURE – DOORS COLOUR BOARD – COLOUR SIDE AND PANELS – ROLL DOOR CABINET
– Minimum order one sheet – Minimum Width 55mm – Delivery UP TO 30km = $35
We are located in units 3 & 4 Pendrey Ct., QLD 4114, Brisbane.

You have to download and save the writeable PDFs before beginning to enter data, or your data will be lost when you save the form.

02 – Order FORM – CARCASS CUT TO SIZE – 16mm WHITE HMR TEXTURE – 1mm EDGING – download HERE

With this form you can order:
– 16mm WHITE HMR TEXTURE – DOORS COLOUR BOARD
– COLOUR SIDE AND PANELS – ROLL DOOR CABINET

 – Minimum order one sheet – Minimum Width 55mm – Delivery UP TO 30km = $35
We are located in units 3 & 4 Pendrey Ct., QLD 4114, Brisbane.

You have to download and save the writeable PDFs before beginning to enter data, or your data will be lost when you save the form.

03 – Order FORM – Full services CUT to SIZE – download HERE

In this form the options included:
– Flat Pack or Assembled – Hardware – Soft-close hinges – Brand, Colour, Finish – Push-to-open, Handles, Finger Pull – Metal Runners or Premium Metal Runners – Door Thick 16mm     18mm – Door Edge Colour – Carcass Edge Colour – Adjustable Legs

– Minimum order one sheet – Minimum Width 55mm – Delivery UP TO 30km = $35

We are located in units 3 & 4 Pendrey Ct., QLD 4114, Logan City, Brisbane South
You have to download and save the writeable PDFs before beginning to enter data, or your data will be lost when you save the form.

04 – Order FORM – VARIABLE WIDTH Cabinets – Standard Sizes Depths & Heights – download HERE

Continental Kitchens Cabinets Standard Sizes

Heights
 – Benchtop – 920mm from the floor.
– Kickboard – 150mm high. It can vary plus or minus 50mm.
– Base (floor) cabinets – 730mm high.
– Wall cabinets – 796mm high for the kitchen 2300mm.
– Overall height – 2070mm (plus or minus 5mm).
– Space between the benchtop and the bottom of the wall cabinets 604mm

Depths
 – Floor cabinets – 560mm deep
– Wall cabinets – 300mm deep – 350mm if undermount range hood applied.
– Wall oven cabinets – 582mm deep
– Benchtops – 600mm deep

Widths
From 150mm to 1200mm in 150mm increments (150mm, 300mm, 450mm, 600mm, etc.).
The exception – dishwasher & oven cabinets with the standard widths.

NOTE: Gas cooktop installation requirements – The distance between a gas cooktop and rangehood: Highest part of the highest burner to the base of the range hood or cabinets must be a minimum of 710 mm.

Custom made kitchens, furniture…, services in Brisbane.

Design, manufacturing and installation are one integrated process and we offer all three services for the best results.
– Kitchens
– Bench tops
– Vanities, bathrooms & laundries furniture – cabinets
– Home office furniture
– Fitted bedroom furniture
– Walk in kitchen pantry storage & shelving
– Walk in wardrobe furniture & wardrobes
– TV cabinet & custom pieces
To speed the process you can download the Custom made kitchen Form – HERE
(You have to download and save the writeable PDFs before beginning to enter data, or your data will be lost when you save the form.)